Ancillary hardware

Each EzCOMM is a computer made up of a core unit, supported by ancillary hardware. Ancillary hardware consists of two subsystems: 1) automation hardware, which actually triggers the action; and 2) access hardware, which leverages a specific physical capability to initiate an action.

Ancillary Products

Automation hardware—setting the standard of excellence in our industry

What makes our system unique from anything else available on the market is what it’s not. It’s not a tangle of wires, cables, Velcro and devices connected to create one system. It’s not second-rate technology that’s slow, hard to use and quickly outdated.

We put a lot of thought into our system and how it will be used. And, nowhere did we cut corners or costs. Every single system component leverages the most advanced technology and highest quality of equipment to make the lives of individuals with disabilities easier and more engaging. You name it and we’ve streamlined it, enhanced it and empowered it. Now, with far fewer devices, wires and cables, individuals can reach a much higher level of independence.

Command center
Command center

Command center

Our sleek command center is an interface used in conjunction with the EzCOMM that offers:

  • Infrared distribution with a reception range of up to 80 ft/24 m
  • 4 IR designer emitters
  • Full power bed control (up, down, head up and down, foot up and down)
  • Split microphone signal, which means one microphone—not two—for access and telephone
  • A nurse-call interface for commercial use
  • Two relays to interface with other automated appliances such as door openers
  • Minimal interference due to CFL and plasma proofing

Z-wave Switch Z-wave plug in module
Z-Wave Switch Z-Wave plug in module

Z-Wave modules

To ensure best-in-class performance, we only use Leviton Z-Wave modules including:

  • Plug-in lamp modules (lamp dimming modules are not intended for use with CFLs)
  • Plug-in appliance modules 
  • In-wall ceiling fan switch
  • In-wall light switch
  • Remote switches (to communicate with Z-Wave switches in multiple switch locations)

Power access 4300 Open Sesame Door Opener
Power Access 4300 Open Sesame Door Opener

Door openers

To fit any environmental setting, we offer two Z-Wave enabled openers:

  • Power Access 4300 (can be for commercial and residential)
  • Open Sesame door system (recommended for residential where space is limited around the door)

Thermostat control
CT 30 Thermostat

Thermostat control

For the utmost comfort, we offer the ability to control household thermostats. Wi-Fi network is required.

 

 


Infrared-capable telephone
Infrared-capable telephone

Infrared-capable telephone

Available upon request.

 

 

 

 

 

Access hardware

Microphone
Microphone

Microphone

Specifically designed for speech recognition use, our microphone is intended to pick up voice from a close proximity. It features built-in noise cancellation, 18-inch microphone and six extra wind socks. Mounting systems are available for wheelchairs and beds.


IntelliGaze
IntelliGaze™

Eye-gaze 

The market-leading IntelliGaze™ system provides the latest camera technology, highly sophisticated image processing and superior calibration methods, and a modular structure that easily integrates with the EzCOMM to empower disabled individuals with the continued use of their touch-screen or scanning software package.


Sip and puff
Sip and Puff

Sip and puff

We offer quality sip and puff systems for hospital beds and wheelchairs to help individuals control the EzCOMM. Systems come with operating straws and saliva traps, and mounting systems are available for wheelchairs and beds.

 


HeadMouse® Extreme
HeadMouse® Extreme

Head mouse 

HeadMouse® Extreme replaces the standard computer mouse for people who cannot use or have limited use of their hands when controlling a computer or augmentative communication device. It connects through a USB port, operates using standard mouse drivers and is powered by the host device, over the USB connection.


Switches

Available upon request.

 

Additional supporting hardware

Wheelchair Mount Rolling floor mount
Wheelchair Mount Rolling Floor
Mount

Wheelchair and rolling floor mounts

The EzCOMM uses a universal mounting pattern—75 mm VESA mounting points—that works with most mounts on the market today. To ensure the utmost performance and durability, we offer Quick Shift Mounting Systems for wheelchairs which feature:

  • Infinite adjustability
  • Maximum degree of movement
  • Easy 3-step mounting
  • Slim modular system
  • High stability
  • Lightweight design
  • Connections free from play

Wheelchair mounting plates are available for the Quick Shift Mounting System, Daessy, Mount’n Mover and CJT.


Sip and Puff Mount
Sip and Puff Mount

Other mounts

We also offer durable, quality mounts for sip and puff systems and microphones that fit a wheelchair or bed.

 

 

 


Lithium Polymer Battery
Lithium Polymer Battery
Supports 6-7 Hours

Replacement batteries

Available upon request.

 

 

 

 


Car Charger
Car Charger

Car adapters

Available upon request.